Many end-users are now requiring regulatory statements of compliance for their base label materials. If you have been asked to provide this type of information, we have people who can help you through the process. When submitting a regulatory/compliance request
, it is helpful to know what regulation is involved (REACH
, REACH list of SVHC
, Toxics in Packaging
, etc.) If you are unsure, Technical Consulting can help determine which regulation is applicable. Our Technical Consulting Hotline number is 877.210.5104, or you can submit a general information request
BS 5609 Certifications
British Standard 5609 is a specification for printed pressure sensitive labels for marine use. BS 5609 testing, which includes a 3-month exposure of labeled plates in salt water, is a requirement for self adhesive drum labels needing International Maritime Dangerous Good (IMDG) certification.
The following products have been tested by Pira International and conform to BS 5609 Part 2 - ‘Maritime and Laboratory Performance of Label Base Materials’:
Click below to view certifications
HP Indigo Certified Substrates
Independent testing was performed at the Printing Application Laboratory at Rochester Institute of Technology.
For scripting information, please visit the Certified Media page of the RIT website.
Quality Management System
Many PS label customers have become certified to ISO9000, QS9000, or other similar standards to improve their business practices. Spinnaker has established a Quality Management System modeled after ISO9001:2015 to assure the quality of the products and services provided by us.
Our Quality Management System places emphasis on product quality through the entire material realization process, from conception to delivery. Careful attention is paid to: design and development validation, materials selection and qualification, process controls and performance verifications, and ultimately, the special needs identified by our customers to ensure we provide products that consistently perform at the highest level.
We have elected not to become registered by a 3rd Party Registrar at this time. However, we encourage customers to visit our facilities to see, first-hand, the practices established to provide the quality and service you count upon. Our Quality Manual is available upon request, and a plant visit can be arranged to assure you we meet any quality requirements you might have for a PS Label Supplier.
PAT - Photographic Activity Test (Per ISO 18916)
ISO 18916 is a test designed to insure that if the face sheet and/or adhesive comes in contact with a photograph, the image will not fade or yellow. This specification does not address the mounting of photographs, such as the holding strength of the adhesive or lack of adhesion over time. The attached pdf shows the results for Spinnaker adhesives and facestocks that have undergone Photographic Activity Testing.