Left Arrow IconPreviousRight Arrow IconNextPlus IconExpandMinus IconCollapseMagnifying Glass IconSearch

Published Roll-Adhesives-PS By Technology

TECHNOLOGYADHESIVEMINIMUM APPLICATIONSERVICE RANGEDESCRIPTION
AmpClamp™45 °F-50 °F to 240 °FBlue right arrow IconA specialty battery hot melt adhesive designed to adhere aggressively to textured polypropylene, typical of battery casings, while withstanding the rigors of heat, chemical, and moisture present in these applications. Paired with the appropriate facestock, it tests well in a number of OEM adhesion and acid tests such as GM6121M Type II label spec. Not for other automotive / underhood applications.
B-8240 °F-50 °F to 150 °FBlue right arrow IconA general purpose hot melt adhesive with excellent quick-stick properties and long-term adhesion to a broad range of surfaces.
BC-20™10 °F-50 °F to 145 °FBlue right arrow IconA cold temperature hot melt adhesive featuring excellent adhesion to a variety of packaging materials and other substrates over a wide temperature range. It displays good die cutting and stripping characteristics.
BP-16440 °F-50 °F to 150 °FBlue right arrow IconA general purpose hot melt adhesive with excellent quick-stick properties. This adhesive exhibits excellent adhesion to a broad range of packaging surfacesand has improved die cutting and stripping attributes compared to other hot melt rubber based adhesives.
CLD-10 (New 2018)10 °F-50 °F to 145 °FBlue right arrow IconAn economical cold temperature hot melt adhesive for a broad range of cold temperature applications needing high initial tack with excellent die cutting and stripping properties. 
FC-12510 °F-40 °F to 170 °FBlue right arrow IconA specialty hot melt adhesive designed for application to the skin of edible raw fruits and vegetables when used with an appropriate face material.  This adhesive does meet the FDA requirements under the 21 CFR 175.125(b)(2) for adhesives.
Frostbite™-15 °F-65 °F to 160 °FBlue right arrow IconA highly aggressive rubber based adhesive featuring excellent initial tack and ultimate adhesion when applied at freezer conditions. Also an excellent choice when applied to packaging materials at room temperature and then subjected to –40F blast freezing conditions. It will adhere to variety of surfaces despite specific amounts of frost and /or moisture (testing is recommended).
When used in warm environments (above room temperature), you will experience ooze and have converting issues.
GP-2825 °F-15 °F to 160 °FBlue right arrow IconAn economic general purpose hot melt adhesive with good initial tack and ultimate adhesion to a variety of substrates
GripTight™40 °F-30 °F to 150 °FBlue right arrow IconAn aggressive hot melt rubber-based adhesive designed for difficult surfaces which may include building materials, manufactured products or components, packaging materials, horticultural products, plastics and wovens. While GripTight™ is a heavy coat weight, it will die-cut, strip and dispense well compared to other similar aggressive adhesives - no adhesive pattern application needed.
LiftOff™30 °F-20 °F to 140 °FBlue right arrow IconA hot melt removable adhesive featuring excellent long-term removability. Good initial adhesion and clean removability allows for use on a variety of surfaces.
SC-2125 °F-50 °F to 140 °FBlue right arrow IconA robust hot-melt adhesive exhibiting excellent adhesion and quick tack to a broad range of surfaces over a wide application temperature range. It displays the superior converting caracteristics of an acrylic and wide web converting is excellent.
SureLock™25 °F-50 °F to 140 °FBlue right arrow IconA hot melt adhesive exhibiting high tack and appropriate flow to aid in many hard-to-stick textured applications. It converts with less build up on press than many other higher coat weight competitors and also provides a flat release profile for good dispensing.
VC-22425 °F-50 °F to 150 °FBlue right arrow IconA dairy label adhesive that withstands cold, wet environments. This component is not available for custom constructions.
VG-21030 °F-65 °F to 160 °FBlue right arrow IconA robust hot-melt, rubber-based adhesive exhibiting excellent adhesion and quick tack to a variety of packaging surfaces over a wide application temperature range. This adhesive works well for blow-on applications and is an excellent choice for wide web converting. This component is not available for custom constructions.
Left Arrow IconPreviousRight Arrow IconNextPlus IconExpandMinus IconCollapseMagnifying Glass IconSearch