Left Arrow IconPreviousRight Arrow IconNextPlus IconExpandMinus IconCollapseMagnifying Glass IconSearch

Published Roll-Adhesives-PS By Application for webcrawl

adhesiveminimum applicationservice rangedescription
4LZ™ (2020)15 °F-40 °F to 240 °FBlue right arrow IconThis acrylic adhesive provides excellent ultimate adhesion to a wide variety of substrates and designed to be compatible with most low-speed and high-speed laser printers.
A-122F-10 °F-65 °F to 200 °FBlue right arrow IconA-122F is a clear all temperature permanent pressure sensitive emulsion acrylic adhesive featuring excellent adhesion to a variety of surfaces over a broad temperature range. A-122F has excellent converting characteristics on press. The high initial tack of A-122F to low surface energy polyolefins makes it an ideal for blow on applications
A-BC-20™10 °F-50 °F to 145 °FBlue right arrow IconA-BC-20 is a light coat weight of BC-20 cold temperature permanent. It is a hot melt, rubber based pressure adhesive featuring excellent adhesion to a variety of packaging materials and other substrates over a wide temperature range. In field processing, A-BC-20 standard constructions have displayed excellent die cutting and stripping characteristics.
AmpClamp™45 °F-50 °F to 240 °FBlue right arrow IconA specialty battery hot melt adhesive designed to adhere aggressively to textured polypropylene, typical of battery casings, while withstanding the rigors of heat, chemical, and moisture present in these applications. Paired with the appropriate facestock, it tests well in a number of OEM adhesion and acid tests such as GM6121M Type II label spec. Not for other automotive / underhood applications.
ATP™-20 °F-65 °F to 200 °FBlue right arrow IconAn all-temperature permanent acrylic adhesive suitable for a wide variety of applications with paper facestocks providing exceptional converting characteristics that allow stripping of intricate die patterns as well as wide-web, high-speed processing.
B-122™F-10 °F-65 °F to 200 °FBlue right arrow IconA clear all temperature acrylic adhesive featuring excellent adhesion to a variety of surfaces with film facestocks. It covers a broad temperature range and has excellent converting characteristics on press. The high initial tack of B-122F to low surface energy polyolefins makes it an ideal for blow on applications
B-8240 °F-50 °F to 150 °FBlue right arrow IconA general purpose hot melt adhesive with excellent quick-stick properties and long-term adhesion to a broad range of surfaces.
B-9140 °F-40 °F to 200 °FBlue right arrow IconA removable adhesive providing excellent medium to long-term removability with minimal or no adhesive residue on a wide variety of substrates, particularly hard, smooth surfaces.
B-9240 °F-40 °F to 200 °FBlue right arrow IconAn aggressive general-purpose removable adhesive with medium initial tack. It will act as a permanent on smooth surfaces over long time periods or when used with paper facestocks.
BC-20™10 °F-50 °F to 145 °FBlue right arrow IconA cold temperature hot melt adhesive featuring excellent adhesion to a variety of packaging materials and other substrates over a wide temperature range. It displays good die cutting and stripping characteristics. This adhesive performs well on wet and oily/greasy applications.
BP-16440 °F-50 °F to 150 °FBlue right arrow IconA general purpose hot melt adhesive with excellent quick-stick properties. This adhesive exhibits excellent adhesion to a broad range of packaging surfaces and has improved die cutting and stripping attributes compared to other hot melt rubber based adhesives.
BP-5240 °F-40 °F to 200 °FBlue right arrow IconA general purpose acrylic adhesive with excellent die cutting characteristics and ultimate adhesion to a broad range of substrates. Well suited for small, cylindrical labeling and is glove friendly.
C-122F-10 °F-65 °F to 200 °FBlue right arrow IconA premium drum and barrel acrylic adhesive for film facestocks that provides excellent adhesion to painted metal, polyolefin and fiber drums in all weather conditions. As a heavy coat weight of B-122F, It is well suited for the most demanding of label applications.
CLD-1010 °F-50 °F to 145 °FBlue right arrow IconAn economical cold temperature hot melt adhesive for a broad range of cold temperature applications needing high initial tack with excellent die cutting and stripping properties. The adhesive performs well when there is light moisture present during application.  
Cryogenic39 °F-320 °F to 248 °FBlue right arrow IconA high tack solvent acrylic with excellent adhesion to small diameter test tubes and ampules. This adhesive resists edge lifting when repeatedly subjected to changes between extremely low temps and room temp, such as removal from liquid nitrogen. This component is not available for custom constructions.
FC-12510 °F-40 °F to 170 °FBlue right arrow IconA specialty hot melt adhesive designed for application to the skin of edible raw fruits and vegetables when used with an appropriate face material.  This adhesive does meet the FDA requirements under the 21 CFR 175.125(b)(2) for adhesives.
Frostbite™-15 °F-65 °F to 160 °FBlue right arrow IconA highly aggressive rubber based adhesive featuring excellent initial tack and ultimate adhesion when applied at freezer conditions. Also an excellent choice when applied to packaging materials at room temperature and then subjected to –40F blast freezing conditions. It will adhere to variety of surfaces despite specific amounts of frost and /or moisture (testing is recommended).
When used in warm environments (above room temperature), you will experience ooze and have converting issues.
GPR™. 40 °F-40 °F to 200 °FBlue right arrow IconA general purpose acrylic removable adhesive designed to remove cleanly from a wide variety of substrates. It is engineered to give excellent tack with minimal building of adhesion over time from a variety of surfaces. It is appropriate for laser applications..
GripTight™40 °F-30 °F to 150 °FBlue right arrow IconAn aggressive hot melt rubber-based adhesive designed for difficult surfaces which may include building materials, manufactured products or components, packaging materials, horticultural products, plastics and wovens. While GripTight™ is a heavy coat weight, it will die-cut, strip and dispense well compared to other similar aggressive adhesives - no adhesive pattern application needed.
HTR-140 °F-40 °F to 200 °FBlue right arrow IconA removable adhesive providing excellent medium to long-term removability. Designed to resist flow at elevated temperatures of continuous and sheet-fed lasers, it offers consistent adhesion, minimal build and clean removability from a variety of substrates, particularly hard, smooth surfaces.
LiftOff™30 °F-20 °F to 140 °FBlue right arrow IconA hot melt removable adhesive featuring excellent long-term removability. Good initial adhesion and clean removability allows for use on a variety of surfaces.
Oil Tolerant41 °F-40 °F to 212 °FBlue right arrow IconOil tolerant is an acrylic adhesive that absorbs oils, enabling strong adhesion to lubricated surfaces. No surface degreasing required and more efficient application.
PDL-0935 °F-10 °F to 200 °FBlue right arrow IconA cold temperature emulsion acrylic adhesive with excellent properties for drum labels. Die-cuts very well and is an excellet choice for roll-to-sheet labels.
PDL-55+25 °F-25 °F to 180 °FBlue right arrow IconAn aggressive emulsion acrylic designed for drum label applications.
PRM-65050 °F-40 °F to 180 °FBlue right arrow IconAn aggressive emulsion acrylic appropriate for indoor and outdoor labeling.
RSM-9218 °F+10 °F to 150 °FBlue right arrow Icona removable, emulsion acrylic adhesive with good performance for indoor and outdoor use.
RSM-9550 °F-40 °F to 180 °FBlue right arrow Icona removable, emulsion acrylic adhesive with good performance for indoor and outdoor use.
SC-2125 °F-50 °F to 140 °FBlue right arrow IconA robust hot-melt adhesive exhibiting excellent adhesion and quick tack to a broad range of surfaces over a wide application temperature range. It displays the superior converting caracteristics of an acrylic and wide web converting is excellent.
SFA™ (2020)15 °F-40 °F to 240 °FBlue right arrow IconA clear, general purpose, emulsion acrylic permanent adhesive designed for applications with film facestocks. SFA exhibits excellent ultimate adhesion to polyethylene, polypropylene and glass. Well suited for small, cylindrical labeling. Limited testing shows this adhesive to be glove friendly, but application testing is recommended.
SP-924G20 °F-40 °F to 240 °FBlue right arrow IconThis acrylic adhesive is designed to cut cleanly while yielding excellent adhesion to a wide variety of surfaces, SP-924G features excellent initial tack and minimal cold flow; it is an excellent choice for transfer tapes..
Left Arrow IconPreviousRight Arrow IconNextPlus IconExpandMinus IconCollapseMagnifying Glass IconSearch