ScanTherm™ RX ** CLD-10 ** 40# liner

Item#: 0046935
	------------ TRIMLESS PROGRAMS ------------
Recommended Print Type(s) to Test Direct Thermal Papers Flexo	Dist. Ctr Troy, Ohio Troy, Ohio	Length 5 K 10 K	Min. Width 3" 4"	Core 3" 3"

---

Facestock: ScanTherm™ RX	A topcoated direct thermal paper face stock specifically engineered for pharmaceutical applications. This product offers excellent resistance to incidental contact with many chemicals such as, hand sanitizers and household cleaners. As it is a paper, not suitable for immersion.
	Typical Value
Basis Weight:	54 #/3300 ft2
Caliper:	3.3 mils
Tensile MD/CD:	32 / 16
Tear MD/CD:	43 / 44 grams
Brightness:	92%

---

Adhesive: CLD-10	An economical cold temperature hot melt adhesive for a broad range of cold temperature applications needing high initial tack with excellent die cutting and stripping properties.
Caliper:	.6 mils
Service Temperature:	-50 to 130 °F
Minimum Application Temperature:	10 °F

---

Release Liner: 40# liner	A bleached, calendered liner featuring excellent die cutting and stripping characteristics. Recommended for use in roll-to-roll applications.
	Typical Value
Basis Weight:	41 #/3000 ft2
Caliper:	2.5 mils
Tensile MD/CD:	34 / 21 #/inch
Tear MD/CD:	34 / 36 grams
Opacity:	69 max%

---

Total Product Caliper: 6.4 mils Product Basis Weight Per MMSI: 238.11 # Shelf Life: 12 month(s) when stored at 72° F, 50% RH

For application recommendations call 877-210-5104 For samples or other questions please call your Sales Representative.

Please login to view additional information on the data sheets. Click here to request a login ID and password.

Important Notice
These are typical values and should not be considered a specification. Adhesive properties were tested with a film facestock unless denoted with an asterisk(*).

All trademarks are the property of their respective owners.

All information, recommendations for use, product designations, and descriptive materials about Spinnaker Coating, LLC products are believed to be reliable, but the furnishing of such information, recommendations for use, product designations, and descriptive material is for informational purposes only and does not constitute a warranty of any kind by Spinnaker Coating, LLC. Because of the variety of possible applications for Spinnaker Coating's products and the continuing development of new applications, all Spinnaker Coating, LLC products are sold with the understanding that each purchaser will independently determine the suitability of any product for the purchaser's intended application, converting, and print processes. Spinnaker Coating, LLC will review, and may modify the information contained in this document from time to time and customers should ensure they have the most recent information.

Last Revision: 04/05/2018