PRODUCT DATA SHEET
518 East Water Street
Troy, Oh 45373
Request A Sample
Print This Data Sheet
Click To Open PDF
2.9 mil ScanTherm-Poly™ (2018) ** BC-20™ ** 40# liner
------------ TRIMLESS PROGRAMS ------------
Recommended Print Type(s) to Test
Direct Thermal Films
2.9 mil ScanTherm-Poly™ (2018)
A biaxially-oriented, multi-layer polypropylene film with a high sensitivity thermal coating. It offers environmental resistance to moisture, oils, and other agents. Initial activation temperature (0.2 ODU) is 185 degrees F. Direct Thermal.
10000 / 13000
A cold temperature hot melt adhesive featuring excellent adhesion to a variety of packaging materials and other substrates over a wide temperature range. It displays good die cutting and stripping characteristics.
Adhesion to Stainless Steel, oz. (90° Peel):
Loop Tack, oz.:
-50 to 145
Minimum Application Temperature:
A bleached, calendered liner featuring excellent die cutting and stripping characteristics. Recommended for use in roll-to-roll applications.
34 / 21
34 / 36
Total Product Caliper:
Product Basis Weight Per MMSI:
month(s) when stored at 72° F, 50% RH
For application recommendations call 877-210-5104
For samples or other questions please call your Sales Representative.
These are typical values and should not be considered a specification.
Adhesive properties were tested with a film facestock unless denoted with an asterisk(*)
are the property of their respective owners.
All information, recommendations for use, product designations, and descriptive materials about Spinnaker Coating, LLC products are believed to be reliable, but the furnishing of such information, recommendations for use, product designations, and descriptive material is for informational purposes only and does not constitute a warranty of any kind by Spinnaker Coating, LLC. Because of the variety of possible applications for Spinnaker Coating's products and the continuing development of new applications, all Spinnaker Coating, LLC products are sold with the understanding that each purchaser will independently determine the suitability of any product for the purchaser's intended application, converting, and print processes. Spinnaker Coating, LLC will review, and may modify the information contained in this document from time to time and customers should ensure they have the most recent informati