60# Premium Semi Gloss Piggyback ** BP-52 ** 40# liner ** BP-52 ** 50# liner
| Item#: 0041981 |  |
| ------------ TRIMLESS PROGRAMS ------------ |
Recommended Print Type(s) to Test
Flexo
| Dist. Ctr
Troy, Ohio | Length
5 K
| Min. Width
3"
| Core
3"
|
| Facestock: 60# Premium Semi Gloss Piggyback | A bright white, premium semi gloss litho that demonstrates excellent print characteristics when printed using flexo, offset, or letterpress. |
| |
| Typical Value |
| Basis Weight: | 60 #/3300 ft2 |
| Caliper: | 3.1 mils |
| Tensile MD/CD: | 35 / 19 |
| Gloss: | 75% |
| Tear MD/CD: | 47 / 46 grams |
| Opacity: | 87.5% |
| Parker Print: | 1.0 microns |
| Brightness: | 89% |
| Adhesive: BP-52 | A general purpose acrylic adhesive with excellent die cutting characteristics and ultimate adhesion to a broad range of substrates. Well suited for small, cylindrical labeling and is glove friendly. |
| |
| |
| Caliper: | .6 mils |
| Service Temperature: | -40 to 200 °F |
| Minimum Application Temperature: | 40 °F |
| Release Liner: 40# liner | A bleached kraft liner featuring excellent die cutting and stripping characteristics. |
| |
| Typical Value |
| Basis Weight: | 39.6 #/3000 ft2 |
| Caliper: | 2.5 mils |
| Tensile MD/CD: | 35 / 15 #/inch |
| Tear MD/CD: | 42 / 48 grams |
| Opacity: | 64% |
| Adhesive: BP-52 | A general purpose acrylic adhesive with excellent die cutting characteristics and ultimate adhesion to a broad range of substrates. Well suited for small, cylindrical labeling and is glove friendly. |
| |
| Typical Value |
| Caliper: | .6 mils |
| Service Temperature: | -40 to 200 °F |
| Minimum Application Temperature: | 40 °F |
| Release Liner: 50# liner | A bleached kraft liner featuring excellent die cutting and stripping characteristics. |
| |
| Typical Value |
| Basis Weight: | 51.6 #/3000 ft2 |
| Caliper: | 3.2 mils |
| Tensile MD/CD: | 45 / 18 #/inch |
| Tear MD/CD: | 60 / 60 grams |
| Opacity: | 80% |
Total Product Caliper: 10 mils
Product Basis Weight Per MMSI: 400.67 #
Shelf Life: 12 month(s) when stored at 72° F, 50% RH | For application recommendations call 877-210-5104
For samples or other questions please call your Sales Representative. |
Please login to view additional information on the data sheets. Click here to request a login ID and password. |
Important Notice
These are typical values and should not be considered a specification. Adhesive properties were tested with a film facestock unless denoted with an asterisk(*).
All trademarks are the property of their respective owners.
All information, recommendations for use, product designations, and descriptive materials about Spinnaker Coating, LLC products are believed to be reliable, but the furnishing of such information, recommendations for use, product designations, and descriptive material is for informational purposes only and does not constitute a warranty of any kind by Spinnaker Coating, LLC. Because of the variety of possible applications for Spinnaker Coating's products and the continuing development of new applications, all Spinnaker Coating, LLC products are sold with the understanding that each purchaser will independently determine the suitability of any product for the purchaser's intended application, converting, and print processes. Spinnaker Coating, LLC will review, and may modify the information contained in this document from time to time and customers should ensure they have the most recent information.
Last Revision: 04/05/2018 |