FC-125

A specialty hot melt adhesive designed for application to the skin of edible raw fruits and vegetables when used with an appropriate face material.  This adhesive does meet the FDA requirements under the 21 CFR 175.125(b)(2) for adhesives.

 

Adhesive Technology:	Rubber
		Caliper:	.5 mils
Minimum Application Temperature:	10°F	Service Temperature:	-40°F to 170°F

  
Regulatory & Compliance -

Complies with 16 CFR 1500.3. Not considered toxic by oral ingestion (oral toxicity) Complies with 16CFR 1500.3 Not a primary (skin) irritant Complies with 16CFR 1500.3 Not an ocular (eye) irritant Complies with 21CFR 175.125b direct food contact Complies with 21CFR 175.105 indirect food contact Complies with 21CFR 801.437 does not contain natural rubber latex (NRL) Complies with CONEG / Toxics in packaging Complies with CPSIA

Applications:

Recommended for testing:		Not recommended for testing:
Edible skins of fruit and vegetables such as apples kiwi bananas cucumbers avocado peppers pears tomatoes

 

Recommended Storage and Shelf Life:

12 month(s) when stored at 72° F, 50% RH

Important Notice
These are typical values and should not be considered a specification. Adhesive properties were tested with a film facestock unless denoted with an asterisk(*).

All trademarks are the property of their respective owners.
All information, recommendations for use, product designations, and descriptive materials about Spinnaker Pressure Sensitive Products, LLC products are believed to be reliable, but the furnishing of such information, recommendations for use, product designations, and descriptive material is for informational purposes only and does not constitute a warranty of any kind by Spinnaker Pressure Sensitive Products, LLC. Because of the variety of possible applications for Spinnaker's products and the continuing development of new applications, all Spinnaker Pressure Sensitive Products, LLC products are sold with the understanding that each purchaser will independently determine the suitability of any product for the purchaser's intended application, converting, and print processes. Spinnaker Pressure Sensitive Products, LLC will review, and may modify the information contained in this document from time to time and customers should ensure they have the most recent information.

Last Revision: 04/05/2018