 | | FACESTOCK | BASIS | CALIPER (mils) | | DESCRIPTION | |
|---|
| | 60# Re-Entry Red | 60 | 4.8 |  | Bright colored papers with a smooth finish suitable when combined with the proper adhesive/liner, for laser and ink jet print technologies. Engineered to deliver consistent high-quality print performance. Sheets contain 30% post-consumer fiber and are Green Seal® certified and Elemental Chlorine Free (ECF). | |
| | 60# Solar Yellow | 60 | 4.8 | | Bright colored papers with a smooth finish suitable when combined with the proper adhesive/liner, for laser and ink jet print technologies. Engineered to deliver consistent high-quality print performance. | |
|
|
 | Coverup/Blockout |
| |
| | 60# Covermatte™ | 60 | 3.7 | | A matte finish paper featuring a black barrier coat applied to the backside for added opacity. This sheet offers excellent ink receptivity and smudge resistance. | |
| | 60# Offset Cover-Up | 60 | 4.7 | | An uncoated stock designed featuring a black barrier coat applied to the backside for added opacity. This sheet has excellent ink receptivity. | |
| | 60# Semi Gloss Cover-up | 58 | 3.0 | | A semi gloss litho with a black barrier coat applied to the backside for added opacity. This facestock demonstrates excellent print characteristics. | |
| | Coverglos™ | 57 | 3.9 | | A cast coated, high gloss paper featuring a black barrier coat applied to the backside for added opacity. Useful for hiding underlying text or graphics. The mirror finish of this sheet makes it an excellent sheet for printing | |
|
|
| |
| | 2.0 mil Clear TC Polyester | | 2.0 | | 2.0-mil gloss clear polyester film topcoated for use with a wide range of ink systems and print methods. Uses include decorative trim, product identification pieces, two-way window decals and p.o.p. graphics.
| |
| | 2.3 mil TC White Metallized BOPP | 39 | 2.3 | | A highly opaque, glossy white, biaxially-oriented polypropylene designed with a print-receptive top coat and metallized backside. It is ideal for cover-up applications. | |
| | 3 Mil TC Matte White Polypropylene | 44 | 2.95 | | A white biaxially-oriented polypropylene film suitable for offset printing and considered as a lower cost alternative to vinyl. Outdoor durability is typically 3 to 6 months. | |
| | 3.4 Mil NTC Matte White Vinyl | 85 | 3.4 | | A white, flexible vinyl which dries easily and quickly when offset printed. Ink type is important; recommend consulting ink vendor for best choice. Typical applications for this product include product identification, decals, indoor and outdoor signage, drum labels and applications requiring good conformability to irregular surfaces. | |
| | 3.4 Mil TC Matte White Vinyl | 85 | 3.4 | | A white, flexible vinyl with a matte top-coating which dries easily and quickly when offset printed. For best printing results, use inks that dry by oxidation. Typical applications for this product include product identification, decals, indoor and outdoor signage, drum labels and applications requiring good conformability to irregular surfaces. | |
| | 3.5 Mil TC Matte Clear Vinyl | 79 | 3.5 | | A clear, flexible vinyl with a matte top-coating which dries easily and quickly when offset printed. For best printing results, use inks that dry by oxidation. Suitable for both indoor and outdoor applications of up to 6 months. Ideal for POP and signage. | |
| | 3.6 mil Polyart® | 46 | 3.6 | | A polyolefin-based, clay-coated, 90-micron-thick film designed to be compatible with most common print methods. It is waterproof, tear-resistant, grease resistant, and resists temperature fluctuations. To minimize pickers curl in hand-applied applications, remove the liner from the facestock when possible (rather than face from liner). Outdoor durability is up to 18 months, depending on climate and exposure conditions. | |
| | SafeTE™ Cover-up TC Film | 61 | 3.8 | | A biaxially-oriented, multi-layer polypropylene film that features tamper evident properties. It is coated with a black cover-up barrier coating which improves opacity for applications requiring little to no show-through of underlying text or graphics. | |
| | SafeTE™ Synthetic | 41 | 4.1 | | A polyolefin-based, clay-coated film design It is waterproof, tear resistant, and resists temperature fluctuations. It is grease resistant. This facestock has been specifically designed to easily delaminate, showing tamper evidence, when used with an aggressive adhesive. | |
|
|
| |
| | 60# Chartreuse Fluorescent | 59 | 4.0 | | A matte, neon bright sheet used for attention getting labels. | |
| | 60# Green Fluorescent | 59 | 4.0 | | A matte, neon bright sheet used for attention getting labels. | |
| | 60# Orange Fluorescent | 59 | 4.0 | | A matte, neon bright sheet used for attention getting labels. | |
| | 60# Pink Fluorescent | 59 | 4.0 | | A matte, neon bright sheet used for attention getting labels. | |
| | 60# Red Fluorescent | 59 | 4.0 | | A matte, neon bright sheet used for attention getting labels. | |
|
|
| |
| | AC Bright Gold Laminated Foil | 73 | 3.5 | | A foil laminated to a 55# coated base paper. This foil has an acrylic top coat. For best results, use inks that dry by oxidation. | |
| | AC Bright Silver Laminated Foil | 73 | 3.5 | | A foil laminated to a 55# coated base paper. This foil has an acrylic top coat. For best results, use inks that dry by oxidation. | |
|
|
| Other Colors |
| |
| | 60# Brown Kraft | 60 | 6.6 | | An unbleached, brown kraft facestock with excellent strength and tear resistance. This facestock has a high degree of stiffness and is not recommended for use on more than lightly curved surfaces or for application around corners due to possible label lift. | |
| | 60# Natural Cream | 60 | 4.6 | | A cream colored, uncoated paper which, when combined with the proper adhesive/liner, is suitable for laser print technologies. This sheet contains 10% post-consumer fiber and is Elemental Chlorine Free (EFC). | |
|
|
| |
Previous
Next
Expand
Collapse
Search