application | | adhesive | minimum application | service range | | description | |
| Removable |
| |
|
| |
| | B-92 | 40 °F | -40 °F to 200 °F | | An aggressive general-purpose removable adhesive with medium initial tack. It will act as a permanent on smooth surfaces over long time periods or when used with paper facestocks. | |
|
| |
| | RSM-92 | 18 °F | +10 °F to 150 °F | | a removable, emulsion acrylic adhesive with good performance for indoor and outdoor use. | |
|
| |
| | B-91 | 40 °F | -40 °F to 200 °F | | A removable adhesive providing excellent medium to long-term removability with minimal or no adhesive residue on a wide variety of substrates, particularly hard, smooth surfaces. | |
| | HTR-1 | 40 °F | -40 °F to 200 °F | | A removable adhesive providing excellent medium to long-term removability. Designed to resist flow at elevated temperatures of continuous and sheet-fed lasers, it offers consistent adhesion, minimal build and clean removability from a variety of substrates, particularly hard, smooth surfaces. | |
| | LiftOff™ | 30 °F | -20 °F to 140 °F | | A hot melt removable adhesive featuring excellent long-term removability. Good initial adhesion and clean removability allows for use on a variety of surfaces. | |
|
| |
| | GPR™. | 40 °F | -40 °F to 200 °F | | A general purpose acrylic removable adhesive designed to remove cleanly from a wide variety of substrates. It is engineered to give excellent tack with minimal building of adhesion over time from a variety of surfaces. It is appropriate for laser applications.. | |
|
| |
| | RSM-95 | 50 °F | -40 °F to 180 °F | | a removable, emulsion acrylic adhesive with good performance for indoor and outdoor use. | |
| |
|
| (Not Categorized) |
| |
| | 4LZ™ (2020) | 15 °F | -40 °F to 240 °F | | This acrylic adhesive provides excellent ultimate adhesion to a wide variety of substrates and designed to be compatible with most low-speed and high-speed laser printers. | |
| | Cryogenic | 39 °F | -320 °F to 248 °F | | A high tack solvent acrylic with excellent adhesion to small diameter test tubes and ampules. This adhesive resists edge lifting when repeatedly subjected to changes between extremely low temps and room temp, such as removal from liquid nitrogen. This component is not available for custom constructions. | |
| | PRM-650 | 50 °F | -40 °F to 180 °F | | An aggressive emulsion acrylic appropriate for indoor and outdoor labeling. | |
| | XYZ™ (2020) | 15 °F | -40 °F to 240 °F | | A general purpose acrylic adhesive for paper facestocks, featuring excellent ultimate adhesion to polypropylene, polyethylene, and glass. Also appropriate for cylindrical labeling such as test tubes, vials, etc with the appropriate facestock. May allow for open time with some substrates. | |