| GRADE | BASIS | CALIPER (mils) | | DESCRIPTION |
|---|
| PrimeScan® Cover-up | 38 | 3.0 |  | This product is a polyolefin-based, clay-coated film designed to offer over 98% opacity. It is coated with an opaque cover-up barrier coating which improves opacity for applications requiring little to no show-through of underlying text or graphics. This product is compatible with most common impact, and many non-impact, print methods. It is waterproof, tear resistant, grease resistant, and resists temperature fluctuations. It will die cut and fold easily and is compatible with hot foil stamping and embossing. Similar to paper, PrimeScan is a film with memory. To minimize pickers curl in hand-applied applications, remove the liner from the facestock when possible (rather than the face from liner). Outdoor durability is up to 18 months, depending on climate and exposure conditions.
|
| Reverse Coated Bright Silver Metallized Paper | 56 | 2.6 | | A silver metallized paper with the adhesive laminated to the metallized side of the sheet. This sheet provides excellent opacity and very good barrier characteristics (i.e. candles). |
| SafeTE ™ C1S | 56 | 3.6 | | A C1S paper designed to provide a high level of destructibility when combined with the appropriate adhesive. This facestock has sufficient strength properties, such as tensile and tear, to permit good performance on press. |
| SafeTE ™ C1S Cover-up | 61 | 3.6 | | A C1S paper designed to provide a high level of destructibility when combined with the appropriate adhesive. An opaque barrier coat applied to the backside of the facestock adds opacity for hiding underlying text or graphics. This facestock has sufficient tensile and tear properties to permit good performance on press. |
| SafeTE™ Cover-up Film | 56 | 3.8 | | A biaxially-oriented, multi-layer polypropylene film that features tamper evident properties. It is coated with an opaque cover-up barrier coating which improves opacity for applications requiring little to no show-through of underlying text or graphics. This face is flexo printable and may be thermal transfer printed if ribbon / substrate combination has been tested for specific performance needs. Primer is recommended when using UV Flexo inks. |
| SafeTE™ Silver Void Polyester | 47.5 | 2.0 | | A glossy Silver polyester film engineered to show tamper evidence, when paired with an apporpriate adhesive, by leaving the word "VOID" in a diagonal pattern on the substrate and label when removed. This facestock has excellent tear strength, chemical resistance, and heat resistance. |
| SafeTE™ Silver Void Polyester (2024) | 49 | 2.0 | | A glossy Silver polyester film engineered to show tamper evidence, when paired with an apporpriate adhesive, by leaving the word "VOID" in a diagonal pattern on the substrate and label when removed. This facestock has excellent tear strength, chemical resistance, and heat resistance. |
| SafeTE™ Synthetic | 41 | 4.1 | | A polyolefin-based, clay-coated film designed to be compatible with most common impact, and many non-impact, print methods. It is waterproof, tear resistant, and resists temperature fluctuations. It is grease resistant. It will die cut and fold easily and is compatible with hot foil stamping and embossing. This facestock has been specifically designed to easily delaminate, showing tamper evidence, when used with an aggressive adhesive. |
| SafeTE™ White Void Polyester | 47.5 | 2.0 | | A glossy white polyester film engineered to show tamper evidence, when paired with an apporpriate adhesive, by leaving the word "VOID" in a diagonal pattern on the substrate and label when removed. This facestock has excellent tear strength, chemical resistance, and heat resistance. |
| Satin Matte Ink Jet Cover-up Paper | 61 | 3.6 | | This opaque matte paper is designed to be compatible with most desktop, roll-to-roll, and wide-format ink jet printers. This sheet delivers excellent photo images, color graphics, and sharp text. It has good water fastness and wet-rub characteristics. The dark gray opaque barrier coat is applied to the backside for added opacity in applications requiring underlying text or graphics to be hidden. |
| Satin Matte Ink Jet Paper | 61 | 3.6 | | This matte paper is designed to be compatible with most desktop, roll-to-roll, and wide-format ink jet printers. This sheet delivers good photo images, color graphics, and text. It has good water fastness and wet-rub characteristics. |
| ScanTherm-Poly™ 4.0 | 53 | 4.1 | | A top-coated, medium-to-high sensitivity, direct thermal polypropylene film facestock. This film demonstrates excellent environmental resistance and medium-to-high print speeds. Initial activation temperature (0.2 ODU) is 180 degrees F. |
| ScanTherm™ Industrial | 54 | 3.3 | | A direct thermal paper with a chemically resistant topcoating that provides exceptional image durability in industrial environments where chemicals and other cleaners may be present. The higher activation temperature offers more durability than a standard direct thermal product, with additional resistance to light, heat and moisture. |
| ScanTherm™ NTC | 51 | 3.3 | | A direct thermal facestock designed for short-duration labeling. As the sheet does not have a grease resistant top coating, it is not suitable for applications requiring water or chemical resistance (solvents, oils, fats, or similar substances). |
| ScanTherm™ Ultra (2021) | 48.4 | 3.1 | | A standard sensitivity, ultra-low abrasion, general purpose direct thermal paper designed to cover a broad range of applications, including industrial and weigh scale applications. It is top-coated for resistance to water, oil, and other chemicals and offers good heat and light resistance. |
| ScanTherm™ Ultra (New 2016) Piggyback | 49 | 3.1 | | A standard sensitivity, ultra-low abrasion, general purpose direct thermal paper designed to cover a broad range of applications, including industrial and weigh scale applications. It is top-coated for resistance to water, oil, and other chemicals and offers good heat and light resistance |
| Semi Gloss Cover-up for Domino | 55 | 3.2 | | This glossy, white top-coated 55# Semi Gloss is appropriate for Domino UV inkjet printing. The dark gray opaque barrier coat is applied to the backside for added opacity in applications requiring underlying text or graphics to be hidden. This facestock is not recommended for wet applications. |
| Semi Gloss Cover-up for EFI™ Jetrion® | 55 | 3.2 | | This glossy, white top-coated 55# Semi Gloss is appropriate for EFI-Jetrion UV inkjet printing. The dark gray opaque barrier coat is applied to the backside for added opacity in applications requiring underlying text or graphics to be hidden. This facestock is not recommended for wet applications. |
| Semi Gloss Cover-up for Screen | 55 | 3.2 | | This glossy, white top-coated 55# Semi Gloss is appropriate for Screen Americas UV inkjet printing. The dark gray opaque barrier coat is applied to the backside for added opacity in applications requiring underlying text or graphics to be hidden. This facestock is not recommended for wet applications. |
| Semi Gloss for Domino | 55 | 3.1 | | This glossy, white top-coated 55# Semi Gloss is appropriate for Domino UV inkjet printing. This facestock is not recommended for wet applications. |
| Semi Gloss for EFI™ Jetrion® | 55 | 3.1 | | This glossy, white top-coated 55# Semi Gloss is appropriate for EFI-Jetrion UV inkjet printing. This facestock is not recommended for wet applications. |
| Semi Gloss for Screen | 55 | 3.1 | | This glossy, white top-coated 55# Semi Gloss is appropriate for Screen Americas UV inkjet printing. This facestock is not recommended for wet applications. |
| SemiGloss Layflat | 54 | 2.6 | | An archival quality, semi gloss sheet engineered to remain stable and flat after flexo and laser printing, providing easy collating and packaging. It is appropriate for both desktop and commercial laser printing. |
| Smudgeproof Kimdura® FPG-80 | 56 | 3.8 | | This film is a matte white, multi-layer polypropylene film top-coated to provide premium dot matrix and thermal transfer print images. Outdoor exposure is up to one year. Typical applications include shelf marking and container labeling. The product is no longer warranted for Flexographic or any non-thermal printing methods based on feedback from the facestock supplier. |
| Tyvek® 1073-D | 50 | 8 | | A high strength, white, spun-bound polyolefin used where tear resistance is required. |
| Ultra Matte™ Litho | 60 | 3.7 | | A premium, matte-coated paper featuring superior smudge resistance, high brightness and high opacity. This sheet offers great ink receptivity, and can also be laser printed. |
| Ultra Matte™ Litho Piggyback | 60 | 3.9 | | A premium, matte-coated paper featuring superior smudge resistance, high brightness, and high opacity. This sheet offers good ink receptivity. |
| Veero 2.3m TC White Polypropylene (2018) | 39 | 2.3 | | A white, biaxially-oriented polypropylene film. The surface has been topcoated to provide superior printability. This facestock has excellent moisture resistance, and good diecutting and dispensing characteristics. This component is not available for custom constructions. |
| Veero 54# Semi Gloss (2018) | 54 | 2.6 | | A bright white, semi gloss litho with excellent strength characteristics. The lower basis weight creates an economical sheet, without sacrificing quality. This component is not available for custom constructions |
| Veero Laser | 50 | 3.7 | | A 50# white facestock specially engineered for toner
fusion and ink jet printing. |
Previous
Next
Expand
Collapse
Search