Digi™ Gloss Optimized for HP Indigo ** GPR™ Removable ** 80# Scored
|Facestock: Digi™ Gloss Optimized for HP Indigo||A cast coated optimized paper that as a construction (Perm/80# liner) is suitable to print on HP Indigo sheet-fed presses. Certified* for use in HP Indigo presses (with Permanent SP924G/ 80# liner). *Independent testing was performed at the Printing Application Laboratory at Rochester Institute of Technology. |
|Basis Weight:||57 #/3300 ft2|
|Adhesive: GPR™ Removable||A general purpose removable adhesive designed to remove cleanly from a wide variety of substrates. It is engineered to give excellent tack with minimal building of adhesion over time from a variety of surfaces. It is appropriate for laser applications.|
|Service Temperature:||-40 to 200 °F|
|Minimum Application Temperature:||40 °F|
|Release Liner: 80# Scored||A white Kraft liner providing excellent layflat characteristics and internal strength for kiss cut applications.|
|Basis Weight:||78 #/3300 ft2|
|Tensile MD/CD:||48 / 25 #/inch|
|Tear MD/CD:||65 / 90 grams|
|Total Product Caliper: 8.94 mils|
Product Basis Weight Per MMSI: 332.21 #
Shelf Life: 12 month(s) when stored at 72° F, 50% RH
|For application recommendations call 877-210-5104|
For samples or other questions please call your Sales Representative.
These are typical values and should not be considered a specification. Adhesive properties were tested with a film facestock unless denoted with an asterisk(*).
All trademarks are the property of their respective owners.
All information, recommendations for use, product designations, and descriptive materials about Spinnaker Coating, LLC products are believed to be reliable, but the furnishing of such information, recommendations for use, product designations, and descriptive material is for informational purposes only and does not constitute a warranty of any kind by Spinnaker Coating, LLC. Because of the variety of possible applications for Spinnaker Coating's products and the continuing development of new applications, all Spinnaker Coating, LLC products are sold with the understanding that each purchaser will independently determine the suitability of any product for the purchaser's intended application, converting, and print processes. Spinnaker Coating, LLC will review, and may modify the information contained in this document from time to time and customers should ensure they have the most recent information.
Please login to view additional information on the data sheets. Click here to request a login ID and password.
Last Revision: 01/07/2015