PRODUCT DATA SHEET
518 East Water Street
Troy, Oh 45373
Request A Sample
Print This Data Sheet
3.0 mil TC Matte White Polypropylene ** B-122™F ** 50# liner
------------ TRIMLESS PROGRAMS ------------
Recommended Print Type(s) to Test
Thermal Transfer Films
3.0 mil TC Matte White Polypropylene
A white, mineral-filled, biaxially-oriented polypropylene film for use in a variety of printing and converting applications where durability, strength, and superior printability are key. One side is matte with a special print-receptive coating and the other is a satin gloss. Its key attribute is excellent thermal transfer printability. It will not tear unless an edge is nicked. Outdoor durability is about 3 to 6 months, depending on climatic conditions.
11352 / 17028
Elongation @ Break MD/TD:
131 / 34
A clear all temperature acrylic adhesive featuring excellent adhesion to a variety of surfaces with film facestocks. It covers a broad temperature range and has excellent converting characteristics on press. The high initial tack of B-122F to low surface energy polyolefins makes it an ideal for blow on applications
-65 to 200
Minimum Application Temperature:
A bleached, calendered liner featuring higher tensile and tear properties than the 40# liner, making it an excellent liner for perforating, fan-folding, and edge-punching.
48 / 26
45 / 51
Total Product Caliper:
Product Basis Weight Per MMSI:
month(s) when stored at 72° F, 50% RH
For application recommendations call 877-210-5104
For samples or other questions please call your Sales Representative.
to view additional information on the data sheets. Click
to request a login ID and password.
These are typical values and should not be considered a specification.
Adhesive properties were tested with a film facestock unless denoted with an asterisk(*)
are the property of their respective owners.
All information, recommendations for use, product designations, and descriptive materials about Spinnaker Coating, LLC products are believed to be reliable, but the furnishing of such information, recommendations for use, product designations, and descriptive material is for informational purposes only and does not constitute a warranty of any kind by Spinnaker Coating, LLC. Because of the variety of possible applications for Spinnaker Coating's products and the continuing development of new applications, all Spinnaker Coating, LLC products are sold with the understanding that each purchaser will independently determine the suitability of any product for the purchaser's intended application, converting, and print processes. Spinnaker Coating, LLC will review, and may modify the information contained in this document from time to time and customers should ensure they have the most recent informati